Details of the GB3KR repeater
GB3KR is located in a residential location on the hillside to the east of Stourport-on-severn, close to the Bay Horse Pub and Stourport Manor hotel. The antenna, a Diamond X50N, is mounted at a modest 4m above ground level in a location that has line-of-sight to the Treasure Island fairground.
Early tests indicate that the intended coverage providing Stourport with handheld access is likely to have been achieved with areas tested so far matching the modelling.
Despite the higher ground to the South and East coverage extends along the A449 at least as far as the Mitre Oak.
The radios are a Tait T855 receiver and T856 Transmitter. The logic is currently SVXLink running on a Raspberry Pi 3B+ with a CM108 sound adapter. e-link for Linx will replace svxlink and the sound card will be replaced with an AudiSense PI hat when development is completed.
A Tait T806 PSU completes the rack, supplying power to the radios and a 5v PSU for the raspberry PI. The T806 float charge capability will eventually be used to add a leisure battery as a UPS. Shut down options include software, through the HTTPS console, an IOT power switch and as a last resort an emergency stop chain to depower the transmitter module.
Summary:
| Callsign: | GB3KR |
| Location: | Stourport upon Severn, West Midlands |
| TX frequency: | 430.8125 |
| RX frequency: | 438.4125 |
| Split TX/RX: | 7.6 MHz |
| Channel spec: | Narrow (2.5kHz deviation, 12.5kHz channel spacing) |
| Modulation: | Analouge FM |
| Analogue CTCSS: | 118.8 Hz |
| 1750Hz Access: | No |
| Antenna: | White stick collinear |
| Keeper: | Ellis G7SAI |
